Phasellus ultrices ligula vitae velit aliquam porta. Integer id vehicula velit.
You may unsubscribe at any time using the unsubscribe link in the digest email.
Peter Drucker, an American-Austrian author once said, “Efficiency is doing things right; effectiveness is doing the right things.”
Growing up, I remember always trying to use a set of wheels to help with whatever job I was doing. Unfortunately, trying to come up with “an easier way” often cost me more time than it would have just to do the job the proven way from the beginning using the existing tools.
Looking back, Drucker’s quote makes a lot of sense: I should have put my time into doing the job more efficiently rather than trying to create a new way to get the job done.
I look at center pivot irrigation today and know it works, and farmers understand it works, which is why they use it. I just had the opportunity to be with the Irrigation Association in Washington, D.C., and the phrase “more crop for the drop” was coined in explaining to congressional staff that we need to become more productive with the infrastructure already in place.
Efficiency can drive the capital cost up, but the long-term operations will have a return on investment, allowing the farmland to be more productive with the same inputs, allowing for more profitability. For example, efficiency can mean more than just the right sprinkler package; it can mean pipe sizing and proper horsepower to get the job done. The more efficient the pipe size is, the less horsepower it takes to move the water, resulting in fewer kilowatt hours on the meter.
Technology can also help make farming more efficient. Remote irrigation management lets you control most irrigation systems from cell phones, which allows you to be in more places at once. “Opportunity cost” is not a tangible expense, but it still shows up in the bottom line.
Valley® Irrigation uses innovative technology to make farming more efficient and create more productive farmland.
A farmer I know has about 15 center pivots, and he used to ride around early in the morning, at lunchtime and then again every evening before bedtime. His wife would tease him and ask him how “the ladies” were. He then discovered irrigation technology that allowed him to monitor and control his pivots from his cell phone. Needless to say, his wife was pretty upset when she found out he could have done this years before.
In addition to the hours of time and gallons of fuel for these trips, you have to calculate the loss of run time if a single center pivot would malfunction just a few minutes after that farmer left the field. That downtime over the next few hours until it was discovered on a hot, humid day could be detrimental to the crop, to say nothing of the potential damage while waiting for the center pivot to be fixed.
This is, of course, the worst-case scenario, but that thought process led this farmer to install the technology. The remote monitoring changed his entire schedule on a daily basis, allowing him more time farming and less time driving.
Naturally, the question comes into play: “What about checking the crop?” The crop still needs to be checked; controlling irrigation doesn’t take the place of going to the field to check the crop on a regular basis. But the point remains: The desire for efficiency drives the development of technology. Wanting to discover a better way allows for future growth and productivity.
Soil moisture sensing and irrigation scheduling are also important to irrigation efficiency. Knowing when to irrigate is always a big question, and over-irrigating can be just as dangerous as not irrigating enough. There is technology out there to help with these decisions.
Irrigation scheduling is based upon the combined factors of soil type, weather, soil moisture content, crop type, etc., letting growers irrigate just what is needed in the most efficient way.
The question is always asked: “How much is this going to cost?” The answer depends on site-specific due diligence and application. But there is a return on investment on the equipment. Every time there is an irrigation cycle saved, a savings on water and electricity results. AgSense® offers technology including soil moisture sensors, irrigation scheduling, weather monitoring and much more to help growers make informed decisions and take complete control of their operation.
Irrigation efficiency is creating more productive farmland. The Irrigation Association recently shared only 18 percent of farmland is irrigated, but that 18 percent produces 40 percent of the harvest. That statistic is staggering to me, knowing most of that farmland probably isn’t even running at its highest efficiency. That little bit of farmland has a huge role in feeding the world’s ever-growing population. Efficiency creates more productivity, allowing for even more harvest.
I’ve discussed irrigation efficiency, but the main catalyst is technology. Technology truly drives efficiency to make the most out of what we have and become more productive. So maybe I wasn’t so far off all those years ago when I tried to add wheels to whatever I was doing; I just needed to be more efficient.
For all the solutions and products that have been discussed today, please visit your local Valley dealer and learn what you can do to become more efficient and, in return, more productive.
Originally published by Progressive Forage, April 27, 2018
About Tyler Fields
Director, Valley Water Delivery
Tyler, an agricultural engineer specializing in land and water resources, joined Valley in April 2013. He had worked in the Valley network for many years, enabling him to work closely with the agricultural irrigation community in assessing the needs of the farm and other ag industries. Tyler grew up on a dairy farm in southern Florida and also has been involved in the daily operations of ranches and row crop farms. Working for Valley allows him to pair his education and his love for agriculture.
28800 Ida St
Valley, NE 68064 USA
© 2020 Valmont Industries, Inc.